Crypton Green - Lucerne

Lucerne is part of the new Crypton Green environmentally friendly range of fabrics and is available in 3 colours.
Request Sample:
Product Name:
First Name:
Last Name:
Email:
Phone: (+61260430200)
Address:
City:
State/Territory/Province:
PostCode
Country:
Company:

High Resolution Images

Thunder | Fire | Mud

Product Specifications

Quality
Lucerne CRP005-E
Composition
70% Recycled Polyester
 
30% Polyester
Enviromental Rating

Recyclable
Yes
CTA Rating
HC
Colours in Range
3
Design
Jacquard
Roll Length
50 (Approx metres)
Width
137 (cm)

Weight
340g/m2 ±7%
Tear Strength (N)
70 min
Pilling
4 min
Seam Slippage mm
4mm max
Colourfastness
Light 6 min
 
Water 4 min
 
Perspiration 4 min
 
Washing 4 min
 
Rubbing 4 min
Abrasion
40,000 min (Martindale)
Flammability
Complies (AS 1530.3)
Pattern Repeat
H: 125mm
(Approximately)
V: 80mm

Cleaning Instructions

Most spills on Crypton® Green can easily be cleaned with a towel before they dry. Just wipe up the spill with a clean cloth, or for dried or more difficult stains, Crypton® Green can be easily cleaned with a soap-and-water mixture. Simply combine 1 part of an enzyme powder detergent such as OMO or Drive with 5 parts water (10 parts water for the 2X detergents). Apply the solution to the stain and wait a minute or two to allow the detergent to begin removing the stain. Then lightly rub/scrub the area and rinse thoroughly with clean water. Remember, water will not penetrate Crypton Green's barrier so don't be afraid to rinse liberally. All soap residue must be completely removed. As with any fabric, dirt and dust can build up, so vacuuming regularly is advised.

Crypton® Green should not be cleaned with solvent based cleaners, nor should it be dry cleaned.